Original Huawei Telecom Equipment PTN 910-F Hot sell
Feature
The OptiX PTN 910-F supports various types of services and provides rich functions and features to ensure service transport quality and efficiency.
- Rich Service Types
- Powerful Processing Capability
- The service processing capability of the OptiX PTN 910-F is categorized into the switching capability and the service access capability.
- Rich Interface Types
- The external interfaces of the OptiX PTN 910-F are categorized into service interfaces, administration and auxiliary interfaces
- Protection Capabilities
- The OptiX PTN 910-F provides various network level protection.
- Layered OAM
- The OptiX PTN 910-F provides OAM functions at many layers to detect and locate faults rapidly
- QoS Capabilities
- The OptiX PTN 910-F has complete quality of service (QoS) capabilities, and provides the eight per-hop behavior (PHB) groups known as BE, AF1, AF2, AF3, AF4, EF, CS6, and CS7.With the equipment, the network operators can provide services of different quality classes for users. In this way, an integrated network emerges to carry data, voice and video services at the same time.
- Precision Synchronization
- The OptiX PTN 910-F supports the physical-layer clock synchronization1588 adaptive clock recovery (ACR) clock synchronization, IEEE 1588v2 precision time protocol (PTP). With these clock solutions, the equipment provides high-precision clock/time for the communication network.
- DHCP Relay
- OptiX PTN 910-F supports the DHCP Relay function, which helps the base stations to automatically obtain IP addresses.
- High Efficiency Tunnel Technology
- Green Network Design for Energy Conservation
- The OptiX PTN 910-F adopts the energy conservation design and provides the energy conservation platform, which realizes more efficient energy management and helps reduce OpEx.
Specification
| Temperature | Humidity (non-condensing) |
|---|
-20ºC to 60ºC | 5% to 95% |
NOTE:- When the equipment is equipped with industrial optical modules, the temperature must be within the range of -20ºC to 60ºC; When the equipment is equipped with commercial optical modules, the temperature must be within the range of -5ºC to 55ºC.
- If equipment is installed in a cabinet, the effect of radiation can be ignored. If equipment is installed outdoors, proper protection against radiation must be provided for the equipment.
- The temperature and humidity are measured 1.5 m above the floor and 0.4 m ahead of chassis when it works under normal environment conditions (without any protection plate in front of the cabinet).
|
Other climatic requirements during operation
| Item | Specification |
|---|
| Altitude | ≤ 4000 m |
| Temperature change rate | 0.5°C/min |
| Air following speed | ≤ 5 m/s |
| Atmospheric pressure | 70 kPa to 106 kPa |
| Solar radiation | ≤ 700 W/m2 |
| Heat radiation | ≤ 600 W/m2 |
